Connecting Power - OHAUS Scout SJX Serie Manual De Instrucciones

TM
SCOUT SJX SERIES BALANCES
2.1.4 Security Slot
A security slot is provided at the rear of the balance allowing the balance to be secured by an
optional cable and lock accessory.
2.2 Selecting the Location
For best performance, the Scout balance should be used in a clean, stable environment. Do not
use the balance in environments with excessive drafts, with rapid temperature changes, near
magnetic fields or near equipment that generates magnetic fields, or vibrations.
2.3 Leveling the Balance
The Scout has an illuminated level indicator as a reminder that the balance should be leveled
for accurate weighing. There is a level bubble in a small round window on the front of the
Balance. To level the balance, adjust the feet at each corner until the bubble is centered in the
circle. Be sure the equipment is level each time its location is changed.

2.4 Connecting Power

AC Adapter Installation
AC power is used to power the scale when battery power is not needed. First, connect the AC
Adapter (supplied) to the AC Adapter Input Jack at the rear of the balance then connect the AC
plug to an electrical outlet.
AC Adapter Input Jack
Interface Connection
Battery Installation
Install the four "AA" batteries with polarity as shown in the battery compartment.
Note:
After power on, it is recommended to let the balance warm for at least 5 minutes before using it.
Find Quality Products Online at:
Figure 2-4. Level indicator
Weigh Below Hole
Security Switch
Security slot (Anti-theft lock slot)
Battery Compartment Cover
Figure 2-5. Rear and bottom view of balance
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com
EN-3