SICK WS24-2 Manual De Instrucciones página 14

OPERATING INSTRUCTIONS
8 Devices with special features
9 Troubleshooting
10 Disassembly and disposal
en
11 Maintenance
12 Technical data
14 O P E R A T I N G I N S T R U C T I O N S | WS/WE24-2
WSE24-2xx4x: with static front-screen heating for use in environments with gradual
temperature changes within the +5 °C ... +15 °C range.
WS/WE24-2V530S01: M12 male connector, 5-pin, glass front screen, dynamic power
heating on the rear side of the glass, current consumption: sender 150 mA, receiver
140 mA. The dynamic power heating is automatically switched on and off depending on
the ambient temperature (23-26 °C). For the use of quick temperature changes in the
range of <0 °C...+10 °C
The Troubleshooting table indicates measures to be taken if the sensor stops working.
The sensor must be disposed of in line with applicable country-specific regulations.
When disposing of them, you should try to recycle them (especially the precious met‐
als).
NOTE
Disposal of batteries, electric and electronic devices
• According to international directives, batteries, accumulators and electrical or
electronic devices must not be disposed of in general waste.
• The owner is obliged by law to return this devices at the end of their life to the
respective public collection points.
•
WEEE: This symbol on the product, its package or in this document,
indicates that a product is subject to these regulations.
This SICK sensor is maintenance-free.
We do, however, recommend that the following activities are undertaken regularly:
• Clean the optical interfaces using a plastic cleaner, do not use acetone or methy‐
lated spirits.
•
Check the fittings and plug connectors
No modifications may be made to devices.
Subject to change without notice. Specified product properties and technical data are
not written guarantees.
Table 9: Technical data
Sensing range
WS/WE24-2B / -2R
-2V
0 ... 50 m 0 ... 50 m
8008782.1DMA/2022-07-12 | SICK
Subject to change without notice