Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Preparation
Please check the appliance for damage caused
during transport or any damage or defects imme-
diately after delivery.
If you detect transport damage or any other
damage or defects, do not use the appliance
and notify the supplier.
Remove the removable parts (fire-resistant inner
plates, fire compartment, fire basket, ash removal
port and ash pan) from the appliance before you
start installing the appliance.
By removing removable parts, it is easier to
move the appliance and to avoid damage.
Note the location of the removable parts, so
that you can re-position the parts in the cor-
rect place later on.
1
2
1. Remove the appliance from the pallet by
removing the bolts (1).
2. Remove the mounting brackets (2) by turning the
adjustable feet (3) out.
3. Reassemble the adjustable feet (3).
D OVRE
10
3
09-20024-025
Vermiculite inner plates are light and tend to
be ochrous in colour on delivery. They insu-
late the combustion chamber to boost com-
bustion.
Preparing the connection to
the flue
When connecting the appliance to the flue you have
the choice of connecting via either the top or the rear.
See the paragraphs "Connecting to the rear" and
"Connecting to the top".
Connecting to the rear
1
2
E
D
A
B
C
1. Remove the connection collar (2) and baffle plate
(4) from the top of the appliance.
2. Remove the cover (A) from the rear of the appli-
ance after you have removed the rupture disc in
the heat shield.
Subject to change because of technical improvements
3
4
5
6
09-20024-023
Publicidad
