Publicidad
Idiomas disponibles
Idiomas disponibles
1
A
5
6
3
2
4
3. Fit the connection collar (2) and the baffle plate
(4) to the back wall using the mounting materials
supplied (3,5,6).
4. Fit the cover (A) to the top plate using mounting
materials (B,C,D,E).
5. Ensure that the sealing material (1) is always cor-
rectly positioned.
Connecting to the top
As standard, the appliance is delivered with the
connection collar fitted for a connection at the top,
see following figure.
On delivery, the connection at the rear is closed, so
that a back cover does not need to be installed.
Because of the distance to the (combustible)
wall, the protection plate may not be removed
in the back shield.
Outside air connection
If the appliance is placed in a room with insufficient
ventilation, you can connect the connection set to the
appliance for the supply of outside air. The air intake
pipe is 100 mm in diameter. If using a straight pipe,
this pipe may be up to 12 metres long. When using
attachments such as bends, reduce the maximum
length (12 metres) by 1 metre per attachment.
Make sure that you can shut off the combustion air
Subject to change because of technical improvements
supply when not in use to prevent the influx of
moist air.
Installing and connecting
1. Position the appliance in the correct place, and
B
C
D
E
09-20024-028
2. Connect the appliance to the flue hermetically.
3. Re-position all removed parts in the correct
The appliance is now ready for use.
Use
First use
When you use the appliance for the first time, make
an intense fire and keep it going for a good few
hours. This will cure the heat-resistant paint finish.
This may result in some smoke and odours. You
could open windows and doors for a while in the area
in which the appliance is located.
make sure it is level. The appliance is designed
with adjustable feet, which may already be
mounted on the appliance or be included. Use
these adjustable feet so that the appliance can
be placed perfectly level. If the appliance is to be
placed on a smooth floor, the four anti-slip pads
can be placed beneath the adjustable feet to pre-
vent the appliance from moving, see next image.
1
2
places in the appliance.
Never use the appliance without the fire-res-
istant inner plates.
09-20024-023
D OVRE
11
Publicidad
