Publicidad
Idiomas disponibles
Idiomas disponibles
1. Slowly open the door of the appliance.
2. Spread the charcoal evenly across the bottom of
the stove base.
3. Stack a few logs on the charcoal.
Open stacking
If the logs are stacked openly, the wood will burn
quickly as the oxygen can reach each log easily. If
you want to use the stove for a short while, make an
open stack.
Compact stacking
If the logs are stacked tightly, the wood will burn
more slowly as the oxygen can only reach some logs
easily. If you want to burn wood for a longer period,
make a compact stack.
Subject to change because of technical improvements
4. Close the door of the appliance.
5. Control the fire using the air slider under the door.
Maximum amount of wood you can add for 45
minutes: 2,3 kg.
Avoid excessive smoke development e.g. just
after filling. Intense pressure waves/popping
can occur when these gases are suddenly
ignited. Set the air control to maximum pos-
ition or leave the stove door open slightly for a
while.
Controlling combustion air
The appliance has various features for air control;
see next figure.
2
3
1
The appliance has one air slide that regulates both
the primary and the secondary air inlet. If the air slide
is as far to the left as it will go, the primary and
secondary air inlets are open. As the air slide is
moved more to the right, this closes off the primary
air inlet and then the secondary air inlet. If the air
slide is slid as far to the right as it will go, a small air
vent remains open to allow for post-combustion
under the baffle plate.
Advice
Never burn wood with an open door.
Regularly burn wood with intense roaring
fires.
If you burn at a low setting frequently, tar and
09-20024-026
D OVRE
13
Publicidad
