Selco BOX BASIC RI 3000 DeviceNet Instrucciones De Uso página 64

8 16 (MSB) -
17 (LSB) -
9÷12 18÷25 -
13 26 (MSB) 0x01
0x02
0x04
0x08
0x10
0x20
0x40
0x80
27 (LSB) -
4.7 BUS OUT (6*)
Not used
4.8 Lan - RI XP (Optional) (7*)
Consult the section "Accessories".
4.9 Wire end (Optional) (8*)
Consult the section "Accessories".
4.10 Configuration digital inputs
In this manual, all instructions will be referred to:
"Configuration standard digital inputs"
4.10.1 Configuration standard digital inputs
0V = 0 Input opened or not connected (low state)
24V = 1 Input closed or powered (high state)
4.10.2 Configuration inverted digital inputs
0V = 1 Input closed (low state)
24V = 0 Input opened or powered (high state)
Consult the ""Setup" - Parameter 400" section (repair manual Genesis ... ).
64
AI6 Not programmed
6 ANALOG INPUT
NOT USED -
PRE-GAS MODE 0=Pre-gas symergic
1=Fixed pre-gas
TIMING 0=500 ms
COMMUNICATION 1=5.0 s
ALARM
NOT USED -
JOB MODE 0=Standard
1=Job freeze
OPERATING MODE
DOUBLE PULSED
NOT USED -
BYTE 26 BYTE 26
BIT 0x20 BIT 0x10
0 0
0 1
1 0
1 1
BYTE 26 BYTE 26
BIT 0x80 BIT 0x40
0 0
0 1
1 0
1 1
FP operating
Not used
FP operating
OFF
ON
Not used