Diono Radian 3RXT Manual De Instrucciones página 38

INSTALL USING LAP/SHOULDER BELT WITH
5-POINT HARNESS:
1. Place car seat rear-facing in
back seat of the vehicle with
detachable rear-facing base
installed (page 32). The entire
seat bottom should sit flat on the
vehicle seat.
2. Slide the vehicle seat belt
through the rear-facing belt
path and out the other side.
Buckle it. The seat belt should lie
flat and not be twisted.
38
5–50 lb (2.3–22.7 kg)
Radian® 3RXT
1
2