Diono Radian 3RXT Manual De Instrucciones página 64

BELT LOCKING CLIP
WARNING:
If your vehicle lap/shoulder belt is equipped with
ELR (Emergency Locking Retractor) that does not switch to
function as an ALR (Automatic Locking Retractor), you MUST
use a locking clip to secure lap portion of vehicle seat belt. If
you have any questions, please consult your vehicle owner's
manual or contact the vehicle manufacturer.
1. Remove lock clip from back of seat.
2. Route the vehicle seat belt
through the proper belt path and
buckle it in. While pushing down
on seat, pin the two straps together
behind the buckle tongue. Unbuckle
the belt without allowing it to slip.
3. Attach locking clip to lap/shoulder
belt as shown. Rebuckle belt. Check
that lap belt does not move by pulling
hard. If belt loosens or lengthens,
repeat procedure.
64
Radian® 3RXT
1 in
2.5 cm