Diono Radian 3RXT Manual De Instrucciones página 58

SECURING YOUR CHILD
INITIAL SETUP
1. Place your child in the car seat. Make sure their back is
flat against the car seat back. This can be done in or out
of the car. Avoid bulky or heavy clothing because they
will prevent the harness straps from being tightened
properly at first fitment.
2. Place harness straps over child's shoulders and legs and
buckle. You will hear a "click" when buckle tongues are
securely attached. Pull up on each buckle tongue to
make sure it is securely attached.
3. Be sure the harness straps are at the proper height.
WARNING:
rear-facing, however, only use the top three shoulder
harness positions for forward-facing.
HARNESS SETUP
1. Loosen harness straps. Push down on the harness
adjuster while pulling out on the harness straps at the
chest clip. Unbuckle the chest clip and the buckle. Place
harness straps off to the sides.
58
All harness slot positions can be used
Radian® 3RXT