Diono Radian 3RXT Manual De Instrucciones página 55

4. Slide the vehicle seat belt
through the forward-facing belt
path and out the other side.
Buckle it. The seat belt should lie as
flat as possible and not be twisted.
5. Tighten the vehicle seat belt.
Press down firmly in the center of
the car seat. To tighten, pull on the
loose end of the vehicle lap belt to
tighten it.
6. Tighten the top tether strap.
Push the car seat back while
tightening the tether strap to
remove all the slack.
7. Test for tightness. Grab the side
of the car seat on the buckle side
with one hand where the vehicle
seat belt strap is and slide the seat
side-to-side and front-to-back. If
the seat moves less than 1 in (2.5
cm), it is tight enough. Do not test
by grasping top of the car seat.
diono.com
4
5
6
7
55