Publicidad
Technical Information
Figure 31 Outline Drawing and Principal Items
To mount from the 1/4" through hole mounting holes suitable for 1/4" or
M6 hardware, first remove rubber feet secured by M3 hardware.
Figure 32 Feet Label
188
1. Front Cowling Screws; M8 (3)
2. Front Cowling
3. Inlet (NW25)
4. Inlet Screen
5. Exhaust Adapter NW16
6. Gas Ballast Port 1 (1/8" NPT)
7. Gas Ballast Port 2 (1/8" NPT)
8. Main Cowling
9. Mounting Holes: (4) through holes
10. Rear Cowling
11. KA40 Phillips PT hardware (6)
12. On/Off Switch
13. IO Control
14. Power Connection (IEC-320)
15. Hour Meter
Agilent IDP-10 Dry Scroll Vacuum Pump User Manual
See "Gas Ballast"
See "Gas Ballast"
for 1/4" or M6 Hardware
Publicidad
