Publicidad
Technical Information
Kits and Service Options
Agilent pumps will provide many years of trouble-free service if the maintenance
procedures and intervals are observed. Cleaning and tip seal replacement are
recommended when pump base pressure has risen to an unacceptably high level
for your application. If your pump exhibits humming or grinding noises from the
bearings, a major overhaul should be done by Agilent or an authorized rebuild
center. Advance exchange pumps are available to minimize downtime.
The parts needed for tip seal replacement on the IDP-10 are available in the kit
described in Table 9. This kit contains seals and O-rings, and can be obtained from
your Agilent dealer.
Table 19 Accessories and Replacement Kits
Part Number
X3807-67000
X3807-67002
X3807-67003
X3807-68008
For further service options, please contact your local service center listed in the
NOTE
back of this manual and ask for your local representative.
Agilent offers rebuilding service at our repair centers, or you can obtain advance
exchange of complete IDP-10 pumps. The service plans available and their ordering
numbers are given in the following Table.
Table 20 Service Options
Factory Service Plans
IDP-10 Exchange Pump
IDP-10 Exchange with Inlet Valve
IDP-10 Full Pump Rebuild
IDP-10 Full Pump (with Inlet Valve) Rebuild
196
Description
Replacement Tip Seal Set
Front Cowling Assembly
Rear Cowling Assembly
Gas Ballast Kit
Model Number
X3810-69000
X3810-69010
X3810-69000-RP
X3810-69010-RP
Agilent IDP-10 Dry Scroll Vacuum Pump User Manual
Contents
Tip seal, O-ring and lubricant.
Replacement front cowling
material to replace a broken
plastic cowling.
Replacement rear cowling
material to replace a broken
plastic cowling.
Spare Parts
Publicidad
