Publicidad
Idiomas disponibles
Idiomas disponibles
Adjusting the skid crosswise
UN41 0282GI
Proceed as outlined below.
1) Loosen nuts (A).
2) Loosen screw (C).
Adjusting the row spacing
Danger - Warning
Secure the work vehicle in position (lifted off the
ground) with external means (trestles, etc.).
Do not stand under the hoisted machine unless it is
suitably secured in position.
A
A
UN41 0180MG
Proceed as outlined below.
1) Lift the work vehicle slightly off the ground.
2) Loosen the nuts (A).
3) Slide the planting unit along the frame (B) until the
required planting spacing is obtained.
English language
ADJUSTMENT INFORMATION
3) Place the skid (E) on the ploughshare centreline.
4) Tighten screw (C) and nuts (A).
Adjust the gap between the transplanting units to ob-
tain the row spacing required (for distances envisaged,
see "Technical characteristics" for model concerned).
Keep the minimum distance stated on the illustration
between the seedlings and the tractor wheels.
A
A
B
4) Tighten the nuts (A).
5) Adjust the planting units so that the seedlings are
kept (C) 10 - 12 cm away from tractor wheel.
21
E
10 - 12
10 - 12
C
cm
cm
10 - 12
10 - 12
C
C
cm
cm
Use and maintenance
5
C
Publicidad
