Publicidad
Idiomas disponibles
Idiomas disponibles
Proceed as outlined below.
1) Start the tractor and lift the work vehicle as far off the
ground as is permitted.
2) Get into the means of transport from the tractor's
driving seat.
3) Lower the work vehicle onto the truck bed.
Transit on public roads
Danger - Warning
It is prohibited to carry people and/or things on the
work vehicle.
Before any on-the-road driving remove all the trays
from the tray holder and clean the working and
pneumatic parts to remove any soil residues.
A
UN41 0153MG
Prolonged disuse of the work vehicle
If the work vehicle is not due to be used for long periods,
proceed as follows.
1) Clean the machine thoroughly, taking care to remove
any chemical or fertiliser residues (see "Cleaning the
work vehicle").
2) Check the condition of the all the machine's parts
and replace any that are worn or damaged.
3) Always check that the bolts / screws are correctly
tightened.
4) Apply grease to all the unpainted parts.
English language
INFORMATION FOR USE
4) Off the tractor engine and engage the parking
brake.
5) Anchor the the tractor/work vehicle assembly to the
means of transport with ropes and secure the wheels
with wedges.
6) Affix the relative signalling signs to any parts jutting
out from the means of transport.
When transporting the work vehicle / tractor assembly,
the regulations of the highway code must always be
complied with.
The three-point hitch must be secured with the relative
bars (A) to prevent the work vehicle swinging against
the tractor and the speed of travel must be adjusted to
prevent loss of control of the tractor.
5) Grease the parts that require lubrication (see "Lubri-
cation points diagram").
6) Park the machine carefully on flat ground in a dry
area protected from the weather.
Leave enough room around the work vehicle for the
hitching up and unhitching manoeuvres.
Lower the foot to the ground (if featured) to guarantee
work vehicle stability.
30
6
Use and maintenance
Publicidad
