Hupfer BTH/60-60 Manual De Instrucciones página 44

Chapter 5
Page 18
5.2 Operation
WARNING
Filling the water tank
Close the water drain tap.
Fill the water tank with 30-40l water (fill level about 4'' (100 mm)).
INFO
Set temperature
The On/Off switch and the thermostat for the water tank are arranged on the front side of the Mobile Cutlery
Soak Sink.
Connect the Mobile Cutlery Soak Sink to the mains.
Switch on the appliance with the On / Off switch. The indicator integrated in the switch will light up to
show that the appliance is ready for operation.
Set the desired temperature using the thermostat of the water tank. A continuous adjustment is pos-
sible within the 4 power ranges.
INFO
Loading
Put cutlery items into the water tank.
5.3 Measures at the End of Operation
Switch off the Mobile Cutlery Soak Sink
Set all thermostats to 0.
Switch off the appliance with the On / Off switch.
Pull out the mains plug and insert it into the plug park provided.
Release the total brakes.
Grip the Mobile Cutlery Soak Sink by the push bars and move it to the destination.
When you got to the destination, apply both total brakes and make sure they are locked and the ap-
pliance is secured against unintended movement.
Mobile Cutlery Soak Sink
BTH/60-60
All manuals and user guides at all-guides.com
Risk of hot surfaces
If the thermostat is set to the level 3 and higher, the permitted maximum tem-
perature of 149° F (65° C) for touchable appliance surfaces can be exceeded.
This can cause burns.
Only instructed staff may operate the appliance. Wear suitable protective
clothing.
Water quality
If tap water is particularly rich of minerals use softened water to reduce depos-
its of scale.
Operating temperature
If the appliance is filled with cold water (59° F) (15° C)) up to 4'' (100 mm) and
switched on to the maximum power, the water in the water tank will reach a
temperature of 140° F (60° C) in about 180 minutes.
Operation
Operation
4330030_A1