Publicidad
Idiomas disponibles
Idiomas disponibles
1
Getting Started
Table 1-1
SSI connector pin description (continued)
SSI timing signal
CLK10M
STAR_TRIG
GA0,GA1,GA2
Chassis installation
The L-Mount kit is to be installed to your U2741A module.
The following instructions describe the simple procedure of installing the L-Mount
kit and your module in the chassis.
1 Unpack the L-Mount kit from the packaging.
2 Remove your U2741A module from the bumper casing.
3 Use a Phillips screwdriver to fasten the L-Mount kit to your U2741A module.
4 Insert your U2741A module into the U2781A chassis with the 55-pin
5 Once you have slotted in the module, tighten the screws of the L-Mount kit to
26
backplane connector positioned at the bottom of the module.
secure the connection.
Functionality
10 MHz clock source
Star trigger
Geographical address pin
Keysight U2741A User's Guide
Publicidad
