Etac molift 8 point Sling bar Balance bar Manual De Usuario página 6

8 point Sling bar Balance bar | BM69399 Rev. B | www.etac.com
Handling
Transportation
8PSB is portable when not connected to hoist, as shown below. Note that the 8PSB weighs above 10 kg,
and therefore must be transported by more than one person.
Areas, marked with
Recommended handling during transport
Assembly
8PSB is delivered fully assembled.
Disposal
When the product reaches the end of its lifetime, it should be separated by material type so that the
parts can be recycled or disposed of properly. Please see recycle instruction at www.etac.com.
Installation
The device shall only be mounted on a rail system with a capacity of 350 kg or higher.
If the device is mounted on a rail system with a lower lifting capacity, the lowest capacity
also applies for the device.
Place the 8PSB on a stabile surface (e.q. floor).
in illustration below, are suitable for handling during transport and lifting of 8PSB.
6