Publicidad
Idiomas disponibles
Idiomas disponibles
2.6 PERSONAL SAFETY
FR
• STAY ALERT, WATCH WHAT YOU ARE DOING AND USE COMMON SENSE
ES
WHEN OPERATING A POWER TOOL. DO NOT USE A POWER TOOL WHILE
YOU ARE TIRED OR UNDER THE INFLUENCE OF DRUGS, ALCOHOL OR
MEDICATION. A MOMENT OF INATTENTION WHILE OPERATING POWER TOOLS
PT
MAY RESULT IN SERIOUS PERSONAL INJURY.
IT
• USE PERSONAL PROTECTIVE EQUIPMENT. ALWAYS WEAR EYE
PROTECTION. PROTECTIVE EQUIPMENT SUCH AS DUST MASK, NON-SKID
EL
SAFETY SHOES, HARD HAT, OR HEARING PROTECTION USED FOR APPROPRIATE
CONDITIONS WILL REDUCE PERSONAL INJURIES.
PL
• PREVENT UNINTENTIONAL STARTING. ENSURE THE SWITCH IS IN
THE OFF-POSITION BEFORE CONNECTING TO POWER SOURCE AND/OR
RU
BATTERY PACK, PICKING UP OR CARRYING THE TOOL. CARRYING POWER
TOOLS WITH YOUR FINGER ON THE SWITCH OR ENERGISING POWER TOOLS
KZ
THAT HAVE THE SWITCH ON INVITES ACCIDENTS.
• REMOVE ANY ADJUSTING KEY OR WRENCH BEFORE TURNING THE
UA
POWER TOOL ON. A WRENCH OR A KEY LEFT ATTACHED TO A ROTATING PART
OF THE POWER TOOL MAY RESULT IN PERSONAL INJURY.
RO
2.7 POWER TOOL USE AND CARE
• DO NOT FORCE THE POWER TOOL. USE THE CORRECT POWER TOOL FOR
EN
YOUR APPLICATION. THE CORRECT POWER TOOL WILL DO THE JOB BETTER
AND SAFER AT THE RATE FOR WHICH IT WAS DESIGNED.
• DO NOT USE THE POWER TOOL IF THE SWITCH DOES NOT TURN IT
ON AND OFF. ANY POWER TOOL THAT CANNOT BE CONTROLLED WITH THE
SWITCH IS DANGEROUS AND MUST BE REPAIRED.
• DISCONNECT THE PLUG FROM THE POWER SOURCE AND/OR
THE BATTERY PACK FROM THE POWER TOOL BEFORE MAKING ANY
ADJUSTMENTS, CHANGING ACCESSORIES, OR STORING POWER TOOLS.
SUCH PREVENTIVE SAFETY MEASURES REDUCE THE RISK OF STARTING THE
POWER TOOL ACCIDENTALLY.
• STORE IDLE POWER TOOLS OUT OF THE REACH OF CHILDREN AND DO
NOT ALLOW PERSONS UNFAMILIAR WITH THE POWER TOOL OR THESE
INSTRUCTIONS TO OPERATE THE POWER TOOL. POWER TOOLS ARE
DANGEROUS IN THE HANDS OF UNTRAINED USERS.
• MAINTAIN POWER TOOLS AND ACCESSORIES. CHECK FOR
MISALIGNMENT OR BINDING OF MOVING PARTS, BREAKAGE OF PARTS
AND ANY OTHER CONDITION THAT MAY AFFECT THE POWER TOOLS
• DO NOT OVERREACH. KEEP PROPER FOOTING AND BALANCE AT
ALL TIMES. THIS ENABLES BETTER CONTROL OF THE POWER TOOL IN
UNEXPECTED SITUATIONS.
• DRESS PROPERLY. DO NOT WEAR LOOSE CLOTHING OR JEWELLERY.
KEEP YOUR HAIR, CLOTHING AND GLOVES AWAY FROM MOVING PARTS.
LOOSE CLOTHES, JEWELLERY OR LONG HAIR CAN BE CAUGHT IN MOVING
PARTS.
• IF DEVICES ARE PROVIDED FOR THE CONNECTION OF DUST
EXTRACTION AND COLLECTION FACILITIES, ENSURE THESE ARE
CONNECTED AND PROPERLY USED. USE OF DUST COLLECTION CAN REDUCE
DUSTRELATED HAZARDS.
• DO NOT LET FAMILIARITY GAINED FROM FREQUENT USE OF TOOLS
ALLOW YOU TO BECOME COMPLACENT AND IGNORE TOOL SAFETY
PRINCIPLES. A CARELESS ACTION CAN CAUSE SEVERE INJURY WITHIN A
FRACTION OF A SECOND.
OPERATION. IF DAMAGED, HAVE THE POWER TOOL REPAIRED BEFORE
USE. MANY ACCIDENTS ARE CAUSED BY POORLY MAINTAINED POWERTOOLS.
• KEEP CUTTING TOOLS SHARP AND CLEAN. PROPERLY MAINTAINED
CUTTING TOOLS WITH SHARP CUTTING EDGES ARE LESS LIKELY TO BIND AND
ARE EASIER TO CONTROL.
• USE THE POWER TOOL, ACCESSORIES AND TOOL BITS ETC. IN
ACCORDANCE WITH THESE INSTRUCTIONS, TAKING INTO ACCOUNT THE
WORKING CONDITIONS AND THE WORK TO BE PERFORMED. USE OF THE
POWER TOOL FOR OPERATIONS DIFFERENT FROM THOSE INTENDED COULD
RESULT IN A HAZARDOUS SITUATION.
• KEEP HANDLES AND GRASPING SURFACES DRY, CLEAN AND FREE FROM
OIL AND GREASE. SLIPPERY HANDLES AND GRASPING SURFACES DO NOT
ALLOW FOR SAFE HANDLING AND CONTROL OF THE TOOL IN UNEXPECTED
SITUATIONS.
214
Publicidad
