Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE : The steering tube has the same functions (steering tube's ON/OFF trigger switch and
FR
steering tube's safety lock-off button ) to switch the tool on or off after assembling the steering
tube.
ES
PT
DO NOT USE YOUR FINGERS TO FREE UP JAMMED BLADES. JAMMED BLADES
IT
CAN RELEASE SUDDENLY CAUSING SERIOUS INJURY. NEVER TOUCH THE
BLADE RAIL WHILE IN OPERATION AND BE AWARE OF SHARP EDGES EVEN
EL
WHEN THE BATTERY GRASS SHEAR IS NOT IN USE.
PL
Always ensure you are securely balanced with a free work area before switching on the grass
shear.
RU
Position button
There are three working positions to operate the grass shear after assembling the steering
tube.
KZ
Push the position button of the steering tube to choose the best working position to operate the
tool working.
UA
Operation safety warnings :
• CHECK THE PRODUCT AND CHARGER AS WELL AS ACCESSORIES FOR
RO
DAMAGE BEFORE EACH USE. DO NOT USE THE PRODUCT IF IT IS DAMAGED OR
SHOWS WEAR.
EN
• DOUBLE CHECK THAT THE ACCESSORIES AND ATTACHMENTS ARE
PROPERLY FIXED.
• ALWAYS HOLD THE PRODUCT ON ITS HANDLE. KEEP THE HANDLE DRY TO
ENSURE SAFE SUPPORT.
• ENSURE THAT THE AIR VENTS ARE ALWAYS UNOBSTRUCTED AND CLEAR.
CLEAN THEM IF NECESSARY WITH A SOFT BRUSH. BLOCKED AIR VENTS MAY
LEAD TO OVERHEATING AND DAMAGE THE PRODUCT.
• SWITCH THE PRODUCT OFF IMMEDIATELY IF YOU ARE DISTURBED WHILE
WORKING BY OTHER PEOPLE ENTERING THE WORKING AREA. ALWAYS LET
THE PRODUCT COME TO COMPLETE STOP BEFORE PUTTING IT DOWN.
• DO NOT OVERWORK YOURSELF. TAKE REGULAR BREAKS TO ENSURE YOU
CAN CONCENTRATE ON THE WORK AND HAVE FULL CONTROL OVER THE
PRODUCT.
• BEFORE SWITCHING THE PRODUCT ON, CHECK WHETHER IT HAS BEEN
ASSEMBLED CORRECTLY AND ALL THE MOVING PARTS ARE RUNNING
SMOOTHLY.
• WE RECOMMEND SLIGHTLY DAMPENING SURFACES IN DUSTY CONDITIONS
OR USING A MISTER ATTACHMENT.
CAUTION : DO NOT FORCE THE BLADES THROUGH DENSE GROWTH.
IF THE BLADES SLOW DOWN, THEN REDUCE YOUR CUTTING PACE.
SHOULD THE BLADES JAM, RELEASE THE TRIGGER IMMEDIATELY.
• OPERATE THE PRODUCT ONLY AT REASONABLE HOURS – NOT EARLY IN THE
MORNING OR LATE AT NIGHT WHEN PEOPLE MIGHT BE DISTURBED.
• AVOID USING THE PRODUCT IN BAD WEATHER CONDITIONS, ESPECIALLY
WHEN THERE IS A RISK OF LIGHTNING. DO NOT OPERATE THE PRODUCT IN
POOR LIGHTING. THE OPERATOR REQUIRES A CLEAR VIEW OF THE WORK AREA
TO IDENTIFY POTENTIAL HAZARDS.
• OPERATING SIMILAR TOOLS NEARBY INCREASES BOTH THE RISK OF
HEARING INJURY AND THE POTENTIAL FOR OTHER PERSONS TO ENTER YOUR
WORK AREA.
• KEEP FIRM FOOTING AND BALANCE.
• DO NOT OVERREACH. OVERREACHING CAN RESULT IN LOSS OF BALANCE.
ALWAYS BE SURE OF THE FOOTING ON SLOPES.
• WALK, NEVER RUN. KEEP ALL PARTS OF YOUR BODY AWAY FROM ANY
MOVING PART.
• NEVER RUN THE PRODUCT WITHOUT THE PROPER EQUIPMENT ATTACHED.
• DO NOT MODIFY THE PRODUCT IN ANY WAY OR USE PARTS AND
ACCESSORIES THAT ARE NOT RECOMMENDED BY THE MANUFACTURER.
• DO NOT TO TOUCH MOVING HAZARDOUS PARTS BEFORE THE MACHINE
IS DISCONNECTED FROM THE MAINS AND THE MOVING HAZARDOUS PARTS
HAVE COME TO A COMPLETE STOP
222
Publicidad
