Publicidad
Idiomas disponibles
Idiomas disponibles
8.2 REPLACEMENT
Fitting and changing the blades 2.1 to 2.9
The battery grass shear is equipped with two interchangeable blades. The hedge trimmer blade
is used to cut hedges and shrubs while the grass shear blade is used to cut grass and hedges
where finer detail is required.
1.Turn the battery grass shear upside down holding in one hand on a hard surface.
Gently lift the tab of the blade cover and slide back until the cover can be removed.
2.Gently remove the blade by lifting the end tip of the blade off of the battery grass shear unit.
3.Insert the desired blade into the base of the motor housing.
4.Align the 4 lugs for a secure fitment. The gear shaft in the middle of the blade also has to be
aligned.
5.Once the blade is in position, align the blade cover with the slots in the base of the motor
housing.
6.Push forward on the blade cover until it slides and clicks into place. The battery grass shear
is now ready for use.
To remove a blade
1.Turn the battery grass shear upside down holding in one hand on a hard surface. Gently lift the
tab of the blade cover and slide back until the blade cover can be removed.
2.Remove the blade gently by lifting the end tip of the blade off the battery grass shear unit.
3.Follow steps 2 - 6 of "Fitting and changing the blades" to secure the blade.
Assemble the steering tube
NOTE: It depends on your working demand whether assembling the steering tube.
1. Install the grass shear into the slot of the steering tube.
2. Connect the steering tube's plug to the socket of the grass shear.
3. To remove, unplug the steering tube's plug and remove the grass shear form the slot.
225
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
Publicidad
