Publicidad
Idiomas disponibles
Idiomas disponibles
5. When adjustment is completed, press the SET button.
▶ WAIT appears on the display.
6. When +00000 appears on the display, press the SET button again.
7. Recheck calibration. → page 29
If the laser cannot be calibrated, consult Hilti Service.
7.2
Hilti Measuring Systems Service
Hilti Measuring Systems Service checks the scanning tool and, if deviations from the specified accuracy are
found, recalibrates it and rechecks to ensure conformity with specifications. The service certificate provides
written confirmation of conformity with specifications at the time of the test. The following is recommended:
•
Choose a test/inspection interval that matches usage of the device.
•
Have the product checked by Hilti Measuring Systems Service after exceptionally heavy use or subjection
to unusual conditions or stress, before important work or at least once a year.
Testing and inspection by Hilti Measuring Systems Service does not relieve the user of the obligation to
check the scanning tool before and during use.
8
Transport and storage of cordless tools and batteries
Transport
CAUTION
Accidental starting during transport !
▶ Always transport your products with the batteries removed!
▶ Remove the battery/batteries.
▶ During transport, the product should be protected from excessive shock and vibration. Severe shock
and vibration can affect accuracy.
▶ Never transport batteries loose and unprotected. During transport, batteries should be protected from
excessive shock and vibration and isolated from any conductive materials or other batteries that may
come in contact with the terminals and cause a short circuit. Comply with the locally applicable
regulations for transporting batteries.
▶ Do not send batteries through the mail. Consult your shipper for instructions on how to ship undamaged
batteries.
▶ Prior to each use and before and after prolonged transport, check the product and the batteries for
damage.
Storage
WARNING
Accidental damage caused by defective or leaking batteries !
▶ Always store your products with the batteries removed!
▶ Store the product and the batteries in a cool and dry place. Comply with the temperature limits stated in
the technical data.
▶ Do not store batteries on the charger. Always remove the battery from the charger when the charging
operation has completed.
▶ Never leave batteries in direct sunlight, on sources of heat, or behind glass.
▶ Store the product and batteries where they cannot be accessed by children or unauthorized persons.
▶ Prior to each use and before and after prolonged storage, check the product and the batteries for
damage.
9
Troubleshooting
9.1
Fault indication
If it detects an error or an abnormality, the laser shows the letter E accompanied by a 2-digit error code (e.g.
'E-02') on the display.
Try to rectify the problem by applying the measures described below.
If faults cannot be rectified by means of these measures or if a fault is recurrent, consult Hilti Service.
30
English
2354475
*2354475*
Publicidad
