Dräger X-plore ADF 5-13 Instrucciones De Uso página 12

en |
Safety-related information
1 Safety-related information
Dräger X-plore ® Welding Visor with ADF 5-13
1.1 General safety statements
– Before using this product, carefully read these instructions for use and those
of the employed respiratory protective device.
– Strictly follow the instructions for use. The user must fully understand and
strictly observe the instructions. Use the product only for the purposes
specified in the intended use section of this document.
– Do not dispose of the instructions for use. Ensure that they are retained and
appropriately used by the product user.
– Only trained and competent users are permitted to use this product.
– Comply with all local and national rules and regulations associated with this
product.
– Only trained and competent personnel are permitted to inspect, repair and
service the product.
– Use only genuine Dräger parts for maintenance work and repairs.
Otherwise, the proper functioning of the product may be impaired.
– Do not use a faulty or incomplete product. Do not modify the product.
– Notify Dräger in the event of any component fault or failure.
– Wear impact-resistant eye protection (e.g. goggles) and ear protection
during the use of the product.
– Material that comes into direct contact with the skin of the wearer may
cause allergic reactions in sensitive persons.
2 Conventions in this document
2.1 Meaning of the warning notes
The following warning notes are used in this document to notify users of
possible dangers. The meanings of the warning notes are defined as follows:
Alert icon Signal word
WARNING
12
Consequences in case of nonob-
servance
Indicates a potentially hazardous situa-
tion. If not avoided, it could result in
death or serious injury.
Alert icon Signal word
CAUTION
NOTICE
3 Description
3.1 Product overview
Illustration on the fold-out page (figure A)
1 Head cover with face cuff
2 Tube connection
3 Drawstring
4 Visor
5 Operating unit (see "Operating
unit", page 13)
Instructions for use |
Dräger X-plore
Consequences in case of nonob-
servance
Indicates a potentially hazardous situa-
tion. If not avoided, it could result in
physical injury. It may also be used to
alert against unsafe practices.
Indicates a potentially hazardous situa-
tion. If not avoided, it could result in
damage to the product or environment.
6 ADF fastener
7 Receptacle with ADF (see "ADF
(automatic welding protection fil-
ter)", page 13)
8 External protective screen
9 Support ring with sweatband
®
Welding Visor with ADF 5-13