Descargar Imprimir esta página

Joie spin 360 GTi Manual De Instrucciones página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 57
5. Place the child into the child restraint and pass both arms through
the harnesses.
!
After the child is seated, recheck whether the shoulder harnesses
are at the proper height.
6. Engage the buckle. Please refer to
28
7. Pull down the adjustment
webbing and adjust it to the
proper length to make sure your
child is properly secured.
!
Make sure the space between the
child and the Shoulder Harness
Straps is about the thickness of
one hand.
8. If steps
&
&
are taken when
24
25
26
arriving at your destination whilst
removing the child, then the
harness will be positioned so that
it is out of the way and ready for
loading upon your return to the
vehicle.
15
28
29
29
Using in the Forward Facing Mode
(Child height 76cm-105cm/Child weight 19.5kg/
15 months - 4 years old)
see images
-
3
9
!
Please install the child restraint on
the vehicle seat, and then put the
child in the child restraint.
see images
-
30
37
1. Press the ISOFIX adjuster button
-1
and pull the base back from
30
the vehicle seat.
-2
30
2. Press the rotating button to rotate
for easier side loading/unloading
of the child, then rotate forwards
to desired direction.
31
&
33
3. If a tighter install or increased
cabin space is required, then
press the ISOFIX adjuster button
-1
and push to adjust.
32
32
30
2
31
32
-2
2
1
1
16

Publicidad

loading