Publicidad
Idiomas disponibles
Idiomas disponibles
!
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points.
33
!
The load leg must be installed
correctly with green indicator.
-2
33
!
Always make sure the seat is in
locked position (rearward facing /
forward facing) even when the
child is not in it.
Securing Child
After the child is placed into the
seat, check whether the shoulder
harness straps are at proper height.
1. Press the webbing adjustment
button, while pulling out the
shoulder harnesses to the proper
length.
34
2. Unlock the buckle of the
harnesses by pressing the red
button.
35
3. Fix the buckles on the both sides
of seat to make placing the child
in forward facing mode more
convenient.
36
4. When installing the child restraint
in the forward facing mode, do
not use the infant insert.
5. Place the child into the child
restraint and pass both arms
through the harnesses. Engage
the buckle.
17
33
-1
1
34
35
36
!
After the child is seated, recheck
whether the shoulder harnesses
are at the proper height.
6. Pull down the adjustment webbing
and adjust it to the proper length to
make sure your child is properly
secured.
37
2
!
Make sure the space between the
child and the Shoulder Harness
Straps is about the thickness of
one hand.
7. If steps
&
34
35
arriving at your destination whilst
removing the child, then the
harness will be positioned so that
it is out of the way and ready for
loading upon your return to the
vehicle.
Detach Soft Goods
see images
38
Press the red button to disengage the
buckle.
38
-
Follow steps
39
goods.
To re-attach the soft goods please
repeat the above steps in the reverse
step.
37
&
are taken when
36
goods
-
45
38
to detach soft
45
18
Publicidad
