Publicidad
Idiomas disponibles
Idiomas disponibles
12. Cleaning
12.1 Cleaning the saw
1.
Switch off the chain saw, remove the battery.
2.
Clean the hedge trimmer with a damp cloth or a resin solvent.
3.
Remove the chain sprocket cover.
4.
Clean the area around the sprocket with a damp cloth or a resin solvent.
5.
Remove foreign matter from the battery compartment and clean the battery compartment with a damp
cloth.
6.
Clean electrical contacts in the battery compartment with a soft brush.
7.
Fit the chain sprocket cover.
12.2 Cleaning the bar and chain
1.
Switch off the chain saw, engage the chain brake and remove the battery.
2.
Remove the bar and chain.
3.
Clean the oil port (1), oil inlet hole (2) and bar groove (3) with a soft brush or a resin solvent.
4.
Clean the saw chain with a soft brush or a resin solvent.
5.
Mount the bar and chain.
84
Publicidad
