Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
○
Lower the motor head, and turn the 6 mm depth adjustment bolt and make adjustments
so that there can be a clearance of 5/64" to 1/8" (2 mm to 3 mm) between the lower
limit position of the motor head and the top of the workpiece at the saw blade's lower
limit position where the head of the 6 mm depth adjustment bolt contacts the hinge.
(Fig. 11-b)
4.
Confi rmation for use of sub fence (A)
WARNING:
Sub fence (A)
6 mm wing bolt
5.
Confi rmation for use of sub fence (B)
WARNING
Sub fence (B)
Fence (B)
6 mm wing bolt
Fig. 13
6.
Oblique angle
Before the power tool is shipped from the factory, it is adjusted for 0°, right angle, left 45°
bevel cutting angle and right 45° bevel cutting angle with the 8 mm set screw, 8 mm bolt (A)
and 8 mm bolt (B).
When changing the adjustment, change the height of the 8 mm set screw, 8 mm bolt (A), or
8 mm bolt (B) by turning them. (Fig.14-a, 14-b, 14-c)
18
When right angle cutting, loosen the 6 mm wing bolt, then slide
the sub fence (A) outward and remove it.
Failure to do so may result in the main body or saw blade coming
into contact with the sub fence (A) and causing injury.
Fence (A)
Fig. 12
: When left angle cutting, loosen the 6 mm wing bolt, then slide the
sub fence (B) outward.
Failure to do so may result in the main body or saw blade coming
into contact with the sub fence (B) and causing injury.
This power tool is equipped with a sub fence
(A).
In the case of direct angle cutting and left bevel
angle cutting, use the sub fence (A). Then, you
can realize stable cutting of the material with a
wide back face.
When right angle cutting, loosen the 6 mm
wing bolt, then slide the sub fence (A) outward
and remove it, as shown in Fig. 12.
This power tool is equipped with a sub fence
(B). In the case of direct angle cutting and
right bevel angle cutting, use the sub fence
(B). Then, you can realize stable cutting of
the material with a wide back face. When left
angle cutting, loosen the 6 mm wing bolt, then
slide the sub fence (B) outward, as shown in
Fig. 13.
Publicidad
Tabla de contenido
