Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE
Removal Instruction
1. Raise/Lower stirrups by squeezing the release handles and simultaneously move the stirrups slowly
to a horizontal level.
2. Gently remove patient's legs from stirrups.
3. Stirrups should be in a vertical position for removal from sockets. Loosen clamp/socket and remove
stirrups.
WARNING: Additional positioning devices should be used when using the stirrup in
Trendelenburg or reverse Trendelenburg.
Device Controls and Indicators
Attach Rail Clamp at Patient Hip
Joint and Mount Stirrup. Handles
Should Mount on the Outside. The
Boot Should Cradle the Upper Calf.
Turning Lithotomy Handle Unlocks
and Controls the Abduction,
Adduction and Lithotomy Controls
of the Stirrup.
Device Maintenance
Make sure that all labels are installed and can be read. Replace labels as necessary by using a plastic
scraper to remove the label. Use an alcohol wipe to remove any adhesive residue.
Contact Kyra Medical, Inc., if you need to repair or replace the device contact us using the information
from the contact details section.
Cleaning and Disinfection:
WARNING:
•
After each use, clean the device as directed in this instruction for use.
•
Do not submerge the device in liquid. Equipment damage can occur.
•
Use caution in areas where liquid can get into the mechanism.
Property of Kyra Medical, Inc. ©2021
This Symbol Represent the Patient's Right foot
Page 7
Loosen Control Handle to
Adjust Boot Flexion,
Extension, Abduction,
Adduction and Rotation.
Ensure Stirrup is Aligned with
Patient's Hip. Toe, Knee and
Opposing Shoulder.
IFU Document Number: 03-0125-REV-G
Publicidad
