Publicidad
Idiomas disponibles
Idiomas disponibles
The command becomes active when the battery voltage drops to the minimum threshold (22Vdc for battery
2x12Vdc)
The command becomes active when the battery voltage drops to the medium threshold (23Vdc for battery
2x12Vdc)
The command becomes active when the battery voltage drops to the maximum threshold (24Vdc for battery
2x12Vdc)
Selecting the battery operation limitations.
N.B.
There is no limitation for the commands when the battery voltage drops under the selected threshold. An error alert
may be activated via the COR output (if parameters
When the battery voltage drops under the threshold selected with par.
commands and does not perform closing.
When the battery voltage drops under the threshold selected with par.
automatically opens the barrier's boom and accepts only a closing command.
It accepts only closing commands even if the ORO input is active and if the parameter is
Selection of the battery type and consumption reduction
NOTE
display shows the message
SELECT. FUTURE USE -
Restoring factory default values
NOTE This procedure is only possible is NO data protection password is set.
Warning! Restoring default settings cancels all settings made previously except for parameter
• Turn off the power.
•
• The display flashes after 4 s
• The default factory settings have now been restored.
N.B.
HW version.
Year of manufacture.
Week of manufacture.
Serial number.
FW version.
View manoeuvre counter
The number consists of the values of the parameters from
N.B.
72
is different than
(if set to
or
+
P1
P2
-
x4 s
.
and
are adequately set).
, the control unit accepts only opening
, after a 5 s pre-flashing, the control unit
and the battery is 2x12Vdc) or an error alert
to
.
Example
to
multiplied by 100.
.
.
Publicidad
