GRAPHITE 58G096 Manual De Instrucciones página 9

TRANSLATION OF THE ORIGINAL
INSTRUCTION MANUAL
CORDLESS RECIPROCATING SAW
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
DETAILED SAFETY RULES (CORDLESS RECIPROCATING SAW)
• Use dust masks when cutting to protect your respiratory system
from produced dust.
• Carefully check the processed material before cutting to eliminate
possibility of cutting nails, bolts, or other hard objects.
• Do not cut objects thicker than allowed in technical specification
for a given material.
• Prior to operation check if there is enough space under processed
material to avoid table or floor damage with the blade.
• Hold the saw with both hands.
• Ensure the saw blade does not have contact with the material
before pressing the switch.
• Do not touch moving parts with your hand.
• Before cutting floor, wall or other material make sure it does not
contain electrical wires.
• Do not put away the saw until it stops moving. Do not switch the
saw on when not holding it with your hand.
• To remove the blade, first switch the saw off with the switch and
wait until the blade stops moving. Then remove battery from the
saw.
• Do not touch the blade or processed material immediately after
the work has been finished. Those elements may be hot and may
cause burns.
• When you experience unusual behaviour of the power tool, see
smoke or hear strange noises, immediately switch off the tool and
remove the battery from the saw.
• To ensure proper cooling keep ventilation holes in the saw body
uncovered.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and
additional safety systems are used, nevertheless there is always
a small risk of injuries at work.
Li-Ion batteries may leak, set on fire or explode when heated to
high temperature or short-circuited. Do not store the batteries
in a car in hot and sunny days. Do not open the battery. Li-Ion
batteries contain electronic protection devices that, if
damaged, may cause fire or explosion of the battery.
Explanation of used symbols
58G096
1. CAUTION! Use precaution measures.
2. Read instruction manual, observe warnings and safety conditions
therein!
3. Use personal protection equipment (protective goggles, earmuff
protectors).
4. Use dust mask!
5. Use protective gloves!
6. Keep the tool away from children.
7. Use protective clothes.
8. Protect the tool from moisture.
9. Remove the battery from the device before starting any
adjustments or cleaning related tasks.
10. This device is designed to operate indoors.
11. Maximum permitted cell temperture: 45°C.
12. Do not throw cells into fire.
13. Recycling.
14. Charger protection class 2.
15. Do not throw cells into water.
CONSTRUCTION AND USE
Reciprocating saw is a battery-powered tool. It is driven with a DC
brushless motor whose rotary movement is transformed to
reciprocating movement. The tool is designed for making straight,
coarse cuts, curved cuts and holes in wood, wood-based materials,
plastics and metals (provided that appropriate blade is used). Range
of use covers repair and building works, and any work from the
range of individual, amateur activities (tinkering).
Use the power tool in accordance with the manufacturer's
instructions only.
DESCRIPTION OF THE GRAPHIC PAGES
The following numbering refers to the machine components shown
on the graphic pages of this manual.
1. saw blade
2. Base
3. Blade quick release lever 4.
4. LED saw light
5. Foot release button 6.
6. Front handle
7. Pendulum on/off button
8. on/off switch
9. Lock button
10. Battery lock button 10.
11. Battery pack
12. LED indicator
13. Charger
14. battery charge level indicator button
15. battery charge level indicator.
EQUIPMENT AND ACCESSORIES
Blade - 1 pc.
PREPARATION TO WORK
REMOVING / INSERTING THE BATTERY
• Press the battery fastening button (10) and slide the battery out
(11) (Fig. A)
• Insert the charged battery (11) into the grip until the battery
button is audibly clicked into place.
BATTERY CHARGING
The device is shipped with a partially charged battery. Charge the
battery when the ambient temperature is between 4 ° C and 40 ° C.
A new battery or one that has not been used for a long time will
reach its full capacity for power supply after about 3 - 5 charging
and discharging cycles.
8