FEATURES
3
1
2
1. Heated 1.1" ceramic barrel
2. Hydrating dual ionic jet emitters
3. Curling button (with audible beep) /
right or left direction
4. Temperature white LED indicator
HOLLYWOOD CURLS
& WAVES AUTOMATIC
ROTATING SYSTEM
Create beautiful glossy curls and waves the fast and easy
way. Progloss™ HOLLYWOOD WAVE, CURL & ADVANCED SHINE's
rotating curling clip gently wraps the hair around the
temperature controlled ceramic barrel for you, producing
effortless, even curls and waves every time.
The ionic jet technology generates outstanding shine and frizz-free salon results.
PROGLOSS™ SUPER SMOOTH OILS
Every product in the Revamp® haircare range is infused with Progloss™ super smooth oils -
enriched with Keratin, Argan oil and Coconut oil for ultimate smoothness and shine.
PREPARING FOR USE
• Before use, ensure hair is clean, dry and tangle-free.
• Plug the appliance into a 120 VAC electrical outlet.
• Press and hold the power
button for 2 seconds to turn on the product. Then
press the temperature setting button °F to select your chosen temperature
indicated with white LED lights. Once the LED light has stopped flashing, the
product has reached the selected temperature and is ready to use.
SETTING
CURL TYPE (for normal hair)
Low
Loose waves
Medium
Loose curls
High
Regular curls
The ionic jet technology is indicated by a blue LED light.
A
4
7
8
5
6
5. Ionic blue LED indicator
6. Temperature setting button
7. Power button
8. Nonslip heat-proof silicone mat
TEMPERATURE
340°F
380°F
410°F
B
CREATING PERFECT CURLS & WAVES
C
• Separate each layer of hair into sections of 1.25" wide. Smooth each section of
hair by brushing or combing through the section (from scalp to hair ends) prior to
curling.
• For extra protection, apply a heat protection spray.
• NOTE: When curling your own hair, be sure to hold the device with the buttons
facing towards you, see (A). Always make sure that the
control buttons with the REVAMP logo located on the
front of the product are facing your face.
• Thread the hair through the small recess at the
front of the product, then down through the deeper
aperture at the back of the product as shown in (C).
Hold the appliance around 2-3" away from your head
(A).
• Choose the direction of the curl by pressing the right
or left curling button (feature 2) as shown in diagram
(D). Work on one side of the head at a time. When you move on to the other side,
press the opposite direction curling button so that your curls are symmetrical (D).
• NOTE: Do not place fingers in the deep aperture at the back of the product or try
to touch the hot barrel.
• Press and hold the curling button and the hair will automatically wrap around the
heated barrel.
• Keep holding the button while the hair is wrapped around the barrel and until you
hear the beep.
• The curling system stops and a beep is heard after 10 seconds which is sufficient
time to curl normal hair.
• After hearing the beep, release the button and wait for the barrel to stop rotating
before lowering the appliance from the hair to release your curl.
• CAUTION: When the curling mechanism has stopped, always pull the product
downwards to release the curl.
• Repeat for each hair section, allowing each curl time to cool in between.
• After use, switch off the appliance, unplug and allow to cool before storing away.
• NOTE: The product may jam if too much hair is fed around the barrel. In this case,
the product will automatically shut off. Simply pull the product down to release
the hair and turn back on again to continue using.
Follow us on (US) https://us.revamphair.com/ and (CAN)
www.revamphair.ca for the latest hair tips and advice.
NOTE:
• Avoid overuse of styling products as this may deteriorate the coating on the
barrel.
• The heated barrel and top end of the appliance get very hot during use. To avoid
burns, keep the barrel away from direct contact with the head and only hold the
appliance by the handle.
• While heating, during use and cooling, place on the
Only hold the product by the cool handle.
• DO NOT scratch the surface of the curl barrel as this will deteriorate the
effectiveness of the coating.
• The product reaches a high temperature during operation. Style with caution
when using. Keep away from the scalp and skin to avoid burns.
D
Revamp®
heat-resistant mat.