Publicidad
Idiomas disponibles
Idiomas disponibles
warning!
!
A risk of injury exists if the safety features are defective.
• if, when checking the emergency stop functions, you find that they do not switch off the
device, shut down the device immediately.
• Have the emergency stop functions repaired immediately.
• do not put the device back into operation until the repair work has been completed.
Monthly...
• Visually check tools and main unit for defects or breakouts and replace if necessary.
• Visually check the knife and shearbar for defects or breakouts and replace if necessary.
• Check markings and signs on the device for legibility and damage and replace if necessary
(see section 2.2 "Symbols on the device").
• Check the oil level and, if necessary, top up the HLP 46 hydraulic oil up to the "Max" mark.
Yearly...
• Complete oil change with 3 litres of HLP 46 hydraulic oil.
every 6 years...
• Replace hydraulic hose.
Maintenance, testing and repairs may only be carried out by qualified electricians in accordance
with the regulations in force in the respective country.
diSMAntLing And diSpoSAL
Attention!
!
A risk exists of injury if the device is lifted in the packaging or if the lifted device falls.
• please note the maximum permissible lifting weights for people.
if necessary, a lifting device must be used.
• do not stand under the suspended device.
• Wear personal protective equipment, especially gloves and safety shoes, when dismantling and
disposing of the device (see section "Personal protective equipment").
The "4-station processing trolley" must be properly disposed of or recycled in accordance
with the local regulations.
26
Publicidad
