Thanks for purchasing our pipe cutting and beveling machines.
This instruction introduces the principle, instruction, function, technical specifications, delivery and
installation, operation methods and safety instructions. Please read the instruction before
using the equipment for correct installation and use.
Our Company takes great pride in manufacturing safe, quality products with user safety apriority. Our
Company recommends that all users comply with the following safety rules and instructions when operating
our equipment. For your safety and the safety of others, read and understand these safety recommendations
and operating instructions before operating.
Warn! To avoid unforeseeable environment or man causes, before operating the machines, the
users should read the instruction carefully, understand the operating procedures and use range. Keep
the manual clean and well for reference at any time.
Regarding the safety instructions, sorted into two grades: Danger and Caution.
Danger: danger causes if the machine is operated wrongly, probably, death or serious injury will cause.
Caution: danger causes if the machine is operated wrongly, probably, medium or gentle injury and
damage to equipment will cause.
Different cases probably cause serious result. The caution and danger notes should be obeyed strictly.
The equipment must be operated by qualified technician, who has received training about how to
operate the machine.
The equipment can just be applied for corresponding design purpose.
Keep working place clean, messy working site will increase the risk of accidents.
Considering the working environment of operating, don't get the equipment wet and don't use the
equipment in humid circumstance. Make the machine work in good conditon.
Don't operate the electric switch, button with wet hands for fear of electric shock .
Protect the body from injury of electric shock, and avoid touch electric parts.
Put the euqipment in dry and safe circumstance if the machine has not been used for a long time.
Wear suitable work clothes. Don't wear loose clothing and jewelry.
Keep clear of rotating parts during opeating.
Wear impact resistant eye and ear protection while operating. If much dust, wear the dustproof
respirator or mask.
Don't overuse the cable. Don't pull the equipment with the cable or sintak the cable to cut off the power.
The cable should be kept away from heat power, oil dirt and sharp-pointed tools. Check the cable regularly,
change it if damaged and repair it if loose. Maintain the equipment regularly. To make the machine work
in good performance, keep it clean. Add oil lubricant and change parts as per operating rules.
Before maintenance or change accessories, such as Tool Bits, make sure the power plug has been
pulled out.
Avoid start up the euqipment unconsciously. When plug in, don't put hands on the switch and ensure it
is cut off.
Use suitable extending power board. If the equipment is used in outdoor, the power board must be
restricted to the outdoor use.
SECTION 1
PRELOGUE
SECTION 2
SAFETY INSTRUCTIONS
13