Sime ECOMAXI VB 200 Instrucciones De Instalación Y Funcionamiento página 51

⑤ Time area
When TIMING light up it displays current time.
When TIMING and ON/OFF both light up it displays time set point of timer.
Note: When the appliance is running, if no operation for long time, it only displays
water tank temperature on the screen. When the appliance is standby, if no operationfor long time, it
displays nothing on the screen.
4.1.2 Operation button illustration
button for set timer.
⑥
button for set time.
⑦
button for add/reduce numbers, or scroll up/down.
⑧
button for change mode.
⑨
button for switch on/off heat pump.
⑩
4.2 Operation instruction
4.2.1 To switch on/off heat pump
From home page, press
Press again to switch off heat pump.
4.2.3 To set desired water temperature
When heat pump is running, press
setting.
4.2.4 To set operation mode
When heat pump is running, press
There are three modes which are BOOST, AUTOMATIC, HEAT PUMP.
4.2.5 To set timer on/off
There are 3 timers available, timer ①, timer ②, timer ③.
Only after timer ① is turned on, you can continue to set timer ②, and then timer ③.
From home page, press
setting.
Press button again, timer ① on minute flash, press
setting.
Press button again, temperature flash, press
setting.
Press button to confirm timer ① on and jump to timer ① off setting.
Timer ① off hour flash, press
Press button again, timer ① off minutes flash, press
button to switch on heat pump.
or button directly to adjust desired water temperature
button to choose operation mode.
button, timer ① on hour flash, press
or button to adjust hour setting.
or
or button to adjust water temperature
or
19
or button to adjust hour
button to adjust minutes
button to adjust minutes