Signature Kitchen Suite SKSFD4826P Manual De Instalación página 20

en-us_main.book.book Page 20 Monday, January 16, 2023 5:19 PM
20 INSTALLATION
Connecting Water Line to Refrigerator
1
Remove the cap from the appliance connection
2
Bend the water line according to the location of the connection on the appliance
CAUTION
• Do not kink the water line. Otherwise, there is a risk of leaks and water damage.
3
Push the union nut
c
4
Screw on the union nut
5
Tighten the union nut using the open-end wrench. Do not overtighten the nut.
Leveling and Securing the Appliance
Aligning and Leveling the Appliance
Depth Adjustment
Adjust the depth of the unit in the enclosure so the door panels will fit flush with the surrounding
cabinetry. Use the gauge tool provided for a precise fit.
1
Measure the thickness of your decorative door panels using the gauge tool.
Set the door panel on a flat, protected surface and place the gauge tool
notch on the gauge tool that matches the thickness of the door panel.
a
and seal onto the water line.
. Tighten by hand.
c
and push into the end of the appliace.
next to the panel. Mark the
a
.
b