SCHUBERTH S3 Manual página 76

C. THE HELMET
12. VENTILATION SYSTEMS
VENTILATION SYSTEM 1 – VISOR SETTING
The S3 has a visor that adjusts to several positions. Depending on your road
speed and the tendency of the visor to mist up, open the visor sufficiently wide
to stop it from misting up but so that it still protects your eyes from excessive
draft.
City position
In the second locking position, the visor is automatically in city position. Air
entering through the bottom gap flows over the inside of the visor and escapes
through the opening at the top.
VENTILATION SYSTEM 2 – VISOR VENTILATION
The S3 features an air inlet in the chin bar for
visor ventilation. Air flows through the open air
inlet regardless of riding position. A deflector
ensures that the air current ventilates the visor
effectively even at low road speeds. Press on
the ventilation unit to open or close the air inlet.
VENTILATION SYSTEM 3 –
CHIN VENTILATION
The chin ventilation provides centered air
supply. The incoming air is cleaned with a
dust filter as well. The chin ventilation can
be opened and closed by moving the slider
up or down.
Tip:
The dust filter can be cleaned or replaced if necessary.
76