Stahlwille MANOSKOP 730D Puesta En Marcha página 26

Menu structure
2
Set torque value
• Enter torque value
Set unit of measurement
• N·m
• ft·lb
• in·lb
Set function mode
• On (cut-out),
• OFF (indicating), no symbol in the display
Set bolting tolerance
• On (with bolting tolerance)
– Enter negative tolerance
– Enter positive tolerance
• OFF (without bolting tolerance), no symbol in the display
Save values
• On (bolting data are saved)
– Enter bolting application number
In delivery condition, the bolting application number is "0000".
• OFF (bolting data are not saved), no symbol in the display
Extension correction
• On (with extension setting)
– Enter extension
• OFF (standard extension), no symbol in the display
Automatic subsequent taring
• On (automatic subsequent taring switched on)
• OFF (no automatic subsequent taring),
no symbol in the display