Stahlwille MANOSKOP 730D Puesta En Marcha página 27

Switch on key lock
• On (key lock switched on)
– Define PIN code
• OFF (key lock switched off), no symbol in the display
When the key lock is switched on, the four-digit PIN code must
be entered before changing a value. In delivery condition, the
key lock is switched off, and the PIN code is "0000".
Short instructions - practical example
3
An example of setting the 730D/20 torque wrench completely is
described in the following. The following data are to be set:
Torque value 90 N·m
"Cut-out" function mode
Bolting tolerance –3 N·m, +5 N·m
The values which are achieved are to be saved
Bolting application number 1000
The extension is 40 mm
EN
27