Publicidad
Idiomas disponibles
Idiomas disponibles
10.
Install the fuel filler pipe and tighten any screws to 44 in-lb (5 Nm).
11.
If equipped, install the urea filler pipe and tighten to 22 in-lb (2.5 Nm).
12.
Reconnect the LH and RH wire harnesses.
13.
Install the tailgate onto the pickup bed.
14.
While inside the pickup bed, inspect the Pucks for proper placement.
•
Puck grooves should sit above the drilled pickup bed holes.
•
There should be a minimum 0.039" (1mm) clearance between the Pucks and holes in the pickup bed.
FIGURE 10
15.
Clean any debris from pickup bed
16.
Check the vehicle exterior lighting for proper operation.
The MAX DUTY Mounting System is ready to be used
With REESE 5
©
2022 Horizon Global
th
Wheel Hitch 30947 or Goose Hitch 30942
Page 7 of 27
30952N
9/30/22
Rev. A
Publicidad
