Zipro Vision Manual De Uso página 10

and should not be thrown away with household waste. Dispose of them
in an appropriate battery recycling centre.
ENVIRONMENT
The device is delivered in a package to protect it against any possible
transport damage. The packaging is made from non-processed
material and can be recycled. Throw the materials to appropriate
colour containers for selective waste collection.
Protect the environment and do not throw used batteries into
household wastes. Return them to the point of sale or a special
recycling centre.
Used electrical equipment (including the computer and power supply)
are recyclable. Do not throw them out with household waste as they
may contain substances dangerous to the health and environment. You
can actively contribute to sustainable use of natural resources and the
protection of the natural environment by handing the used device to
a recycling centre for used electrical devices.
ASSEMBLY
The device must be assembled carefully by an adult. In case of doubt,
ask a more experienced person for help.
ASSEMBLY DIAGRAM (→ See page 2)
ATTENTION! Do not use parts other than those provided by the manufacturer.
PARTS LIST
No. Description
1
Front main frame
2 Rear main frame
3
Saddle and seatback bracket
4 Handlebar
5
Crank
6
Rear base
7L/R Pedal
8
Front base
9
Bolt
10 Curved washer
11
Nut
12
Levelling pad
13
Handling roller
14
Rectangular front main frame cap
15 Plastic bush
16
Frame adjustment knob
17
Bolt
18 Flat washer
ASSEMBLY MANUAL
CAUTION! Follow the steps below during the assembly and use tools supplied with the product.
Prepare sufficient space for the assembly operation.
It is advisable to assemble the product with another person because of the weight of some elements.
•
Prior to the assembly, make sure the set contains all
the listed elements and whether none of the parts was damaged
during transport. If any parts are missing or you have any other
reservations, contact the seller.
• Have a look at the drawings and explanations and follow the
assembly manual when assembling the device.
•
Be careful during the assembly. There is a risk of injury when
using the tools and parts.
• Remember to keep your surroundings safe. Do not let tools and
parts lie around in chaos. Remember that plastic foil and bags
pose o suffocation risk to small children.
•
Assembly parts necessary for a specific step in
the assembly manual are shown in pictures and included in
instructions. Use the elements indicated in the assembly
manual.
• Do not tighten parts completely during the first stages
of the assembly. Tighten connections after all parts are placed
and fitted properly.
• The manufacturer may have assembled some parts.
Quantity No. Description
19
1 Handlebar foam
1 20 Heart rate measurement cable
21
1 Allen bolt
1 22 Flat washer
23
1 Saddle and seatback frame cap
24
1 Seatback
1/1 25 Saddle
26
1 Handlebar cap
27
4 Resistance adjustment knob
4 28 Computer
29
4 Resistance adjustment knob cover
30
2 Flat washer
31
2 Cross-head bolt
32
1 Heart rate connecting cable
1 33 Heart rate connecting cable
34
1 Computer cable
35
2 Flat washer
2 36 Cross-head bolt
Quantity
2
2
12
12
2
1
1
2
1
1
1
1
1
2
2
1
4
4
STEP 1.
Fix the rear (6) and front base (8) to the front (1) and
rear main frame (2) using bolts (9), curved washers
(10) and nuts (11).
NOTE! Remove any plastic or cardboard safety
inserts before assembly.
NOTE! The front base has handling wheels.
EN
10