Euroflex vapour M2R Manual De Instrucciones página 9

B. ATTACH HANDLE ASSEMBLY TO STEAM CLEANER
• Before starting, remove the self-tapping screw from the bottom of
Extension Tube.
• Insert the Handle Assembly into the Steam Cleaner Base. Align Arrow
on ExtensionTube with Arrow on Base (as shown in Fig. A).
• Once inserted, twist Handle Assembly 90° clockwise (as shown in Fig.
B). Be sure Arrow on the ExtensionTube is aligned with Line/Lock Icon
on Base.
Fig. C
Fig. C
Fig. A
Fig. A
90°
Front View
• Align the Handle Assembly screw hole
with the opening in the Steam Cleaner
housing. Secure the handle assembly with
self-tapping screw which was removed
from bottom of Extension Tube (as shown
in Fig. C).
Fig. B
Fig. B
90°
Side View
Before Use
9