Publicidad
Idiomas disponibles
Idiomas disponibles
- Hold the power tool only by the insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring or its own power cord. Contact with a "live" wire will also
make exposed metal parts of the power tool "live" and shock the operator.
- Do not touch the bit during or immediately after operation. The bit becomes very hot during ope-
ration and could cause serious burns.
- If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
CAUTION: The insert tool may become hot during use. There is a risk of burning the hands. Wear Pro-
tective gloves when changing insert.
Residual risks
Even when the power tool is used as prescribed it is not possible to eliminate all residual risk factors.
The following hazards may arise in connection with the power tool's construction and design:
1. Damage to lungs if an e ective dust mask is not worn.
2. Damage to hearing if e ective hearing protection is not worn.
3. Damages to health resulting from vibration emission if the power tool is being used over longer
period of time or not adequately managed and properly maintained.
WARNING! This power tool produces an electromagnetic eld during operation. This eld may
under some circumstances interfere with active or passive medical implants. To reduce the risk of
serious or fatal injury, we recommend persons with medical implants to consult their physician and
the medical implant manufacturer before operating this machine.
Safety instructions
In this operator's manual/or machine's labels following symbols are used:
Double insulation
Protection class
General Warning
Wear ear 、eye and
mask protection.
Built to Exceed
dust
3 YEARS
L I M I T E D WA R R A N T Y
Read the operating instructions
before use.
Warning: Electricity
Immediately unplug the plug from
the main electricity in the case
that the cord gets damage and
during maintenance.
6
Publicidad
