Publicidad
Idiomas disponibles
Idiomas disponibles
Built to Exceed
3 YEARS
L I M I T E D WA R R A N T Y
Select the impact rate with the Speed Adjuster Function Knob6 according to the material.
Changing the Chiseling Position (Vario-lock)
The chisel can be locked in 12 positions. In this manner, the optimum working position can be set
for each application.
Insert the chisel into the tool holder.
Push the limited ring 3 forward and turn the chisel to the required position with the limited ring 3.
Release the Move limited ring backward 3 and turn the chisel until it latches.
Maintenance and Service
Before any work on the power tool itself, pull the mains plug.
For safe and proper working, always keep the power tool and the ventilation slots clean.
A damaged hammer rod protector should be changed immediately. We recommend having this
carried out by an after-sales service.
Indicator 7
When the carbon brushes are worn out, the power tool switches itself o . This is indicated approx. 8
hours beforehand by the lighting or blinking of the indicator 7. The power tool must then be sent to
an after-sales service agent.
If the power tool should fail despite the care taken in manufacturing and testing procedures, repair
should be carried out by an after-sales service center for SIEFKEN power tools.
Clean the machine regularly with a soft cloth, preferably after each use. Solvent such as gasoline,
thinner, alcohol etc.. These kind of chemical materials are not allowed to use, water or soap are
recommended!
Protecting the Environment
Do not dispose of power tools together with household waste material!
The machine, accessories and packaging should be sorted for environmental
friendly recycling.
In observance of European Directive on waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electric tools that have reached the end of their life must
be collected separately and returned to an environmentally compatible recycling facility.
11
Publicidad
