T
n
he appliance is only to be used
with the power supply unit
provided with the appliance.
EN
O
n
5
perating the bed by accident
may
lead
situations. Always place the
remote control in the holder to
prevent you rolling onto it in your
sleep, for example.
D
n
isconnect the bed from the
power supply before cleaning.
Pull the plug out of the socket.
R
n
emove the plug from the
socket during a thunderstorm.
E
n
nsure that when you use an
extension cable, its power is
higher or equal
to
mentioned
the transformer.
Use
approved
extension cable.
3.1 Components of
your mesh base
Your supplier will
install your mesh
base for you. The
drive
should be fitted by
Auping specialists only.
to
dangerous
that
on
an
motors
For
other
parts
installation instructions, we refer
you
to
the
installation
included with the various parts.
3.2 Position of the legs
It is vitally important that the feet
be fitted properly, to ensure the
appropriate distribution of weight.
This means that the legs must be
3. Preparing for use
placed at the distances from head
and foot end of the bed as
indicated
in
illustration (bed seen from above):
Length 190/200 cm: H 20 cm
Length 210/220 cm: H 30 cm
3.3 Attachment of the handset
In order to easily attach the
handset to Auping Auronde, Match
or Essential.
• Place the clamp on the underside
of the side panel of the surround
(see fig. 1).
• Click the handset into
the clamp.
and
detailed
cards
the
following
Head (H)
Foot (F)
F 20 cm
F 30 cm
EN
6