Selco 1000 Serie Instrucciones De Uso página 30

3.8 Digital outputs (connector CN7, CN8, CN11)
Use the following pins as a reference for the ground connections: pins CN9-4, CN9-5, CN9-11, CN9-12 (see paragraph 3.2).
CN7-1 Wire 49
CN7-2 Wire 50
CN7-3 Wire 51
CN7-4 Wire 48
CN7-6 Wire 46
CN8-1 Wire 41
CN8-6 Wire 40
CN11-3 Wire 54
CN11-6 Wire 57
PROGRAMMABLE PARAMETERS:
GAS CYCLE : confirmation signal of gas cycle active.
0V = gas cycle inactive
24V= gas cycle active
SAFETY LIMIT WARNING : confirmation signal of safety limit no warning active.
SAFETY LIMIT ALARM : confirmation signal of no alarms.
30
WELDING TOOL READY: this signal confirms that the welding tool is ready for use (none of
the system's alarms are active).
0V = system in alarm status
24V = welding tool ready for use
GAS PRESENCE: signal confirming gas flow.
0V = "no gas" alarm
24V = gas present
WATER PRESENCE: signal confirming water flow.
0V = water present
24V = "no water" alarm
SAFETY LIMITS: signal confirming that no alarm is active.
0V = safety limits alarm active
24V = no active alarm
PIECE PRESENCE: a signal confirming that the piece was touched during the touch operating
mode.
0V = piece not touched
24V = piece touched
ARC ON: signal confirming that the electrical arc has been powered up.
0V = arc OFF
24V = arc ON
GLUED WIRE ALARM: a signal confirming that the wire was glued to the piece at end of weld-
ing.
0V = wire not glued
24V = wire glued
PROGRAMMABLE DIGITAL OUTPUT 1: the parameter for this digital output can be selected
and programmed by control panel.
Default : not programmed
0V = digital output inactive
24V = digital output active
PROGRAMMABLE DIGITAL OUTPUT 2: the parameter for this digital output can be selected
and programmed by control panel.
Default : not programmed
0V = digital output inactive
24V = digital output active
0V= safety limit warning active
24V = safety limit warning inactive
0V = safety limit alarm active
24V = safety limit alarm inactive
CN7-1 (49) WELDING TOOL READY
CN7-2 (50) GAS PRESENCE
CN7-3 (51) WATER PRESENCE
CN7-4 (48) SAFETY LIMITS ALARMS
CN7-6 (66) PIECE PRESENCE
CN8-1 (41) ARC ON
CN8-6 (40) GLUED WIRE ALARM
CN9-4/5/11/12