Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATIoN
Preparation
10.2 Transport and handling
Material losses
!
f Store and transport the appliance at temperatures
between -20 °C and +60 °C.
Note
Two people are required when installing the adjustable
feet and transporting the appliance.
f Undo the 3 screws on the non-returnable pallet.
Material losses
!
Never roll the appliance over the edge of the pallet.
www.stiebel-eltron.com
Installing supplied carrying straps and adjustable feet
Note
The carrying straps are intended for one-time use to ma-
noeuvre the appliance.
1 Carrying strap
2 Washer
3 Adjustable foot
4 Pipe
5 Threaded hole
f Slide a pipe over one carrying strap.
f Fold over the end of the carrying strap with the two holes
and insert an adjustable foot with washers into the carrying
strap, as shown in the figure.
f Tilt the appliance.
f Screw the adjustable foot with the carrying strap into one
of the threaded holes (shown in the figure) in the appliance
base.
f Fit the second carrying strap likewise.
f Screw an adjustable foot without a carrying strap into the
threaded hole in the appliance base.
1
1 Carrying straps
HSBC 180 Plus | HSBC 180 S Plus |
2
3
4
5
1
1
1
33
Publicidad
