Kärcher KM 90/60 R P Adv Manual Del Usuario página 21

Emptying waste container
Note: After parking the appliance, wait at
least 1 minute before opening or emptying
the waste container. This way the dust can
settle.
 Raise the waste container slightly and
pull it out.
 Empty waste container.
 Push in the waste container and lock it.
 Empty opposite waste container.
Turn off the appliance
Note: After switching off the appliance, the
dust filter is automatically cleaned. Wait for
approx. 2 minutes before opening the appli-
ance cover.
 Set programme switch to step 1 (driv-
ing). The side brush and roller brush are
raised.
 Turn ignition key to "0" and remove it.
Close fuel cock
 Open the device hood.
 Close the fuel supply.
 Close cover.
Transport
Danger
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
Danger
When loading the appliance, the freewheel
lever must be in the lower position. Only
then the travel drive and parking brake are
ready for operation. The machine must al-
ways be moved up or down slopes by en-
gaging self-propulsion.
 Turn ignition key to "0" and remove it.
 Empty fuel tank.
 Secure the wheels of the machine with
wheel chocks.
 Secure the machine with tensioning
straps or cables.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Note: Observe markings for fixing points
on base frame (chain symbols). When
loading or unloading the machine, it may
only be operated on gradients of max. 18%.
Storage
Danger
Risk of injury and damage! Note the weight
of the appliance in case of storage.
Shutdown
If the sweeper is going to be out of service
for a longer time period, observe the follow-
ing points:
 Fill fuel tank and close fuel cock.
 Change engine oil.
 Set programme switch to step 1 (driv-
ing). The roller brush and side brushes
are raised to prevent the bristles being
damaged.
 Turn ignition key to "0" and remove it.
 Unscrew spark plugs and pour approx.
3 cm of oil into the spark plug holes.
3
Crank the engine several times before
replacing the spark plug. Screw in the
spark plug.
 Clean the inside and outside of the
sweeper.
 Park the sweeper on an even surface.
 Park the machine in a safe and dry
place.
 Lock the sweeper to ensure that it does
not roll off.
 Disconnect battery.
 Charge battery approx. every 2 months.
Maintenance and care
General notes
 Switch off the appliance and remove
the ignition key prior to performing any
cleaning or maintenance tasks on the
appliance, replacing parts or switching
over to another function.
 Always disconnect the battery when
working on the electrics.
Maintenance work may only be carried
–
out by approved customer service out-
lets or experts in this field who are famil-
iar with the respective safety
regulations.
Mobile appliances used for commercial
–
purposes are subject to safety inspec-
tions according to VDE 0701.
6
-
EN
Use only roller brushes/ side-brushes
–
that are provided with the appliance or
specified in the Operations Manual.
The use of other roller brushes/ side-
brushes can affect the safety of the ap-
pliance.
The battery installed in the appliance is
–
maintenance-free.
Cleaning
Caution
Risk of damage! Do not clean the appliance
with a water hose or high-pressure water
jet (danger of short circuits or other dam-
age).
Do not use aggressive and abrasive clean-
ing agents.
Cleaning the inside of the machine
Danger
Risk of injury! Wear dust mask and protec-
tive goggles.
 Open the device hood.
 Blow through machine with com-
pressed air.
 Clean the machine with a damp cloth
which has been soaked in mild detergent.
 Close cover.
External cleaning of the appliance
 Clean the machine with a damp cloth
which has been soaked in mild detergent.
Maintenance intervals
Observe the inspection checklist!
Note: The elapsed-time counter shows the
timing of the maintenance intervals.
Maintenance by the customer
Note: Where maintenance is carried out by
the customer, all service and maintenance
work must be undertaken by a qualified
specialist. If required, a specialised Kärch-
er dealer may be contacted at any time.
Note: For description, see section on Main-
tenance work.
Daily maintenance:
 Check engine oil level.
 Check tyre pressure.
 Check fill level of hydraulic oil.
 Check function of all operator control el-
ements.
 Check function of seat contact switch.
Weekly maintenance:
 Check petrol pipes for leaks.
 Check air filter.
 Check moving parts for freedom of
movement.
 Check the sealing strips in the sweep-
ing area for position and wear.
 Check dust filter and clean filter box, if
required.
Maintenance to be carried out every 100
operating hours:
 Change engine oil (initial change after
20 operating hours).
 Check spark plug.
 Check tension, wear and function of
drive belts (V-belt and circular belt).
 Clean air filter.
21