Kärcher KM 90/60 R P Adv Manual Del Usuario página 26

Drive belt (4)
 Check circular belt side brush (5) for
tension, wear and damage.
Circular belt side brush (5)
 Check V-belt of the roller brush drive (6)
for tension, wear and damage.
 Tighten the V-belt at the screw if neces-
sary.
V-belt sweeping drive (6) and screw (7)
Replacing fuses of drive control/ elec-
tronic system
The drive control/electronic system is in-
stalled behind the front panel. To replace a
fuse, the front panel must be removed.
 Loosen the front panel screws.
 Remove front panel.
 Replace defective fuses.
Note: The assignment of fuses is indi-
cated on the inside of the panel. Only
use fuses with identical safety ratings.
 Replace front panel.
F 1 Main fuse
Battery pole fuse
F 2 Printed board
F 3 Charge regulator
F 4 Printed board
F 5 Beacon light (optional) 7,5 A
26
125 A
7,5 A
15 A
25 A
EN
11
-