Brinkmann 810-4580-S Manual Del Propietário página 23

Figure 1
Figure 2
Cotter Pin
Hinge Pin
Front
Back
Hinge Pin
Figure 1
Figure 2
Bolt
Washer
Tank Holder
Spring
Post
Tank Gauge Bracket
Tank Gauge
Needle Assembly
Door Stopper
Cotter Pin
Tank Holder
Figure 3
Shoulder Bolt
Locking Nut
Tank Gauge
Needle Assembly
Step 3
Remove the spring, washer, and
bolt from the tank gauge bracket.
Set aside for use in Step 5. Attach
the tank gauge bracket onto the
base using two M6 x 12 mm bolts
(sliver) as illustrated (Figure 1).
Spring
Tank Gauge Bracket
Attach the tank gauge needle
assembly to the base and the
bracket and secure with a hinge
pin and a cotter pin as illustrated
(Figure 2).
Step 4
Turn cart base right side up, use
two M6 x 12 mm bolts (silver) to
attach the door stopper to the base,
as shown.
Step 5
Use two hinge pins and two cotter
pins, to secure the tank holder to the
tank holder fi xed stands as shown
(Figure 1).
Slide the spring, from Step 3 onto
the tank gauge bracket post. Then
align the tank holder with the post
and secure with the washer and bolt
from Step 3 (Figure 2). Attach the
tank gauge needle assembly to the
tank holder using the shoulder bolt
and the locking nut (Figure 3).
Bolt
Washer
22