Winix NK100 Manual Del Usuario página 13

MANUAL & PLASMAWAVE
3. Manual Mode (setting fan speed)
Users can opt to manually set the fan speed to Low, Medium, High, or
Turbo.
① Press the Mode button to set the
desired fan speed.
•When the button is pressed the unit
will cycle through Auto Mode, Sleep
Mode and fan speeds (Low, Medium,
High, Turbo).
• When Manual Mode is selected, Auto and Sleep Modes are
Note
4. PlasmaWave
By default, PlasmaWave
① When the unit is on, press and
hold the Mode button for at least
3 seconds to enable or disable this
feature.
•When PlasmaWave
indicator light will be on. When it is
disabled the light will be off.
• In Auto mode, as the indoor air quality improves, the fan
Note
• When the unit is running, you may hear a chirping or buzzing
English
automatically disabled.
®
®
is enabled whenever the unit is powered on.
®
is enabled the
speed will automatically be reduced to Low.
sound. The sound is from large particles passing through
®
PlasmaWave , it is normal and does not signify product
failure.
®
seconds
3
NK100
13