Publicidad
Idiomas disponibles
Idiomas disponibles
41. MOUNTING THE SMOKE STACK
Parts Required :
1
x
Smoke Stack (#4)
1
x
Smoke Stack Lid (#3)
1
x
Charcoal Lid
M6x10 mm Screws (#D)
2
x
2
x
M6 Nuts (#J)
Installation :
•
Remove Smoke Stack Lid from Smoke Stack. Insert Smoke
Stack through the Charcoal Lid from the inside. Attach
the Smoke Stack Assembly to the Lid using 2 x M6x10 mm
Screws inserted through the Lid from the outside and
fasten the Smoke Stake using 2 x M6 Nuts securely inside
the Lid. Screw Smoke Stack Lid onto Smoke Stack.
See Fig. 41.
42. INSTALLING WARMING RACK (GAS GRILL)
Parts Required :
1
x
Warming Rack (#5)
1
x
Gas Lid
1
x
Gas Main Chamber
2
x
M6x30 mm Screws (#M)
Installation :
•
Screw 1 x M6x30 mm Screw through the Gas Lid from
the outside, position 1 pc Warming Rack to the gas grill
so that the screw is going through the wire loop.
See Fig. 42.1 and Fig. 42.2.
•
Align the wire loop on the opposite end of the
Warming Rack with the opposite Lid hole and insert
1 x M6x30 mm Screw. Insert the wire legs into the holes
of the Gas Main Chamber.
See Fig. 42.3.
26
FIG. 41
FIG. 42.1
M
5
FIG. 42.2
CORRECT DIRECTION
3
D
D
4
J
J
M
FIG. 42.3
Publicidad
